Capabilities

Milling & Automation

Haas DT-1: High-Speed Drill and Tap Center Features a high-speed 15,000 rpm spindle and a 20" x 16" x 15.5" (508 x 406.4 x 393.7 mm) (X, Y, Z) working area, optimized for rapid-cycle, high-volume production of small precision parts.
Haas DT-2: Extended Drill and Tap Center Delivers 15,000 rpm performance with an expanded 28" x 16" x 15.5" (711.2 x 406.4 x 393.7 mm) (X, Y, Z) working area and a larger 34" x 15" (863.6 x 381 mm) table for handling longer workpieces or multi-fixture setups.
Midaco ADT-1SD: Automatic Pallet Changer Specifically integrated for the Haas DT series, featuring a 22" x 14" (558.8 x 355.6 mm) pallet surface and a 500 lb capacity to enable continuous, unattended "lights-out" manufacturing.
Tornos Almac CU 2007: 5-Axis Precision Machining Center An ultra-flexible 20,000 rpm center featuring a 21.6" x 7.8" x 12.2" (548.6 x 198.1 x 309.9 mm) (X, Y, Z) working area with 1G acceleration and sub-micron repeatability for complex 5-axis geometries.
Sharp TMV-K: Vertical Toolroom Mill A versatile knee mill offering a 30" x 12" x 16" (762 x 304.8 x 406.4 mm) (X, Y, Z) working area with a 3 hp, 4,500 rpm spindle, providing 0.0002" (5.1 µm) TIR accuracy for toolroom and prototype work.
Fanuc Robodrill Mate (A04B-0098-B101): High-Speed Machining Center Features a precision 16.1" x 13" x 12.2" (408.9 x 330.2 x 309.9 mm) (X, Y, Z) working area and a 10,000 rpm BT30 spindle, delivering rapid 1.5-second tool changes for compact precision components.

Tornos Swiss GT 32 w/ LNS Alpha 538 A 6-axis, 8,000 rpm sliding headstock lathe with 32 mm (1.26 in) bar capacity and 34 tool positions for high-efficiency production of complex geometries.
Tornos Swiss GT 13 w/ Iemca Gimco Ideal 325 High-speed 13 mm (0.51 in) precision lathe featuring 15,000 rpm spindles and 0.001° C-axis indexing for rapid, ultra-accurate small-diameter part manufacturing.
Tsugami SS38MH-5AX w/ Edge Technologies Patriot 551 A 5-axis swiveling B-axis Swiss lathe with a 40-tool ATC, 38mm (1.50 in) bar capacity, 20,000RPM Milling/Tool Spindle, Main and Sub 7000 Max RPM, enabling full simultaneous contouring of ultra-complex components in a single setup.

Burr King Vibraking 200: Vibratory Bowl Finisher Delivers high-energy finishing and deburring for delicate micro-parts within a 2.0 cubic foot (56.6 L) chamber, utilizing a quiet, high-performance motor to achieve consistent surface finishes.
Mass Finishing Model HZ-12: Centrifugal Barrel Tumbler Provides ultra-fast, high-G finishing that is up to 30x faster than traditional vibratory methods, perfect for intensive deburring and polishing of precision-machined components.
Crest Ultrasonic Solvac S1: Precision Cleaning System Features a single-chamber, solvent-based ultrasonic cleaning process designed to remove microscopic contaminants and oils from complex geometries with zero residue.